Nemetz Crown Remover

Unique Double Action Head Uses Both Frontal and Lateral Displacement

The Nemetz Crown Remover is special purpose tool that lets you remove plastic or ceramic faced crowns and bridges easily and safely. The Nemetz Crown Remover uses a unique double action that opens the crown or bridge with both frontal and lateral displacement for easy removal.

• Unique head design uses both frontal and lateral displacement to spread the crown and break the cement bond.
• Soft silicone grips give a "tactile" feel that is amazing!
• Instrument is lightweight so it handles and maneuvers comfortably! And it may be sterilized with all standard techniques.
• The two heads are offset 90 degrees to you always have just the right working angle, even in difficult areas.

30500 Nemetz Crown Remover

Technique

1. If porcelain veneer is present, use a diamond to cut a "slot" down to the metal. Use a carbide bur to cut through the metal the entire length of the facial or lingual surface and onto the occlusal.
FIGURE 1 AT RIGHT

2. When there is no metal remaining in the "slot", place the Nemetz Crown Remover firmly down the "slot". Depending on the location use the end which is most comfortable and will allow instrument movement.
FIGURE 2 AT RIGHT

3. Gently rotate the Nemetz Crown Remover while holding it firmly in the "slot". Use only enough force to allow the instrument's techniques head design to spread the crown slightly as it is rotated.
FIGURE 3 AT RIGHT

4. As the crown spreads, displacement will take place in both frontal and lateral directions and the cement bond will be broken. At this point the crown or bridge should be ready to remove.
FIGURE 4 AT RIGHT